Skip to content

Spray foam insulation · Western Pennsylvania

Spray Once, Save a Lifetime.

Fixes a sweating metal roof.

FoamGuard Spray Foam is a certified spray foam insulation contractor in Erie, PA, installing closed-cell and open-cell foam in homes, pole barns, metal buildings and commercial properties across Western Pennsylvania. Backed for five years.

Or call (814) 208-3478. Erie, PA, serving Western Pennsylvania.

See it. Size it. Price it.

What are we insulating?
Pole barn insulated with closed-cell spray foam
40 ft
30 ft
12 ft
2 in. R-14.8

Estimated installed price$9,300 – $13,900Walls, gable ends and roof deck, closed-cell foam

Request received.

Our estimating team will call you within one business day from (814) 208-3478 to go over your building and set up a free walkthrough.

Quality products. Quality workmanship. A predictable outcome.

FoamGuard Spray FoamSample

A Craftsman’s Promise

5 Year Craftsmanship warranty

On our workmanship, every square foot we spray.

Warranty ID
FG-2026-0001
Status
Active
Covers
Our workmanship
Good through
2031

Backed in writing

A Craftsman’s Promise:
5 years on our workmanship.

Every FoamGuard job comes with our 5-year craftsmanship warranty and its own warranty ID. Enter the ID and your ZIP code at foam-guard.com/warranty to see your coverage, any time, from any phone.

  • Lifetime foam warrantyOn the foam, separate from ours: the maker’s limited lifetime warranty, registered for you
  • 0% APR, up to 22 monthsFor qualified buyers: 22 lenders, a 2-minute soft-pull check
  • US-made, lot-traced foamEvery drum’s lot number is recorded on your job
Look up a warranty

Certified. Verifiable. Warranted.

Spray foam is a specialty trade. These are the credentials behind ours, and you can look every one of them up.

  • Spray Polyurethane Foam Alliance member ID 52104571 SPFA MemberMember #52104571 · Verify at sprayfoam.org
  • 5-YearWarranty A Craftsman’s PromiseIn writing, with a lookup ID · Check a warranty
  • Huntsman Building Solutions certified installer Huntsman Certified InstallerTrained on Huntsman closed-cell systems
  • Lot #On file Lot-Traceable MaterialYour foam’s lot numbers · Made in the USA
  • BASF WALLTITE certified installer BASF Certified InstallerTrained on BASF closed-cell systems
  • American Chemistry Council SPF safety completion ID 0000156824 ACC SPF-SafetySafety certification #0000156824

Get the number.

Tell us the building. We'll show you the square footage, board feet and R-value as you go, then your price range.

01PROJECT
02SIZE
03ROOF
04FOAM
Thickness2"R-14.8

Drag it. At 1.5 in. closed-cell controls vapor on its own (a Class II vapor retarder). Past 3.5 in. it buries the 2×4 and stops the thermal bridge. Two to three inches is where most walls and roof decks land.

0square feet treated
0board feet of foam
R-14.8nominal R-value
Where should we send your number?

We'll show it right here and email you a copy. Then we'll call to confirm the details and put a fixed price in writing.

A range, not a contract. We reply within one business day. No spam, no lists sold, ever.

What happens next: we call, walk the building, measure, and send the data sheet with a fixed price.

Education

Learn it before you hire it.

Straight answers from a certified installer: how to choose a contractor, what bad foam looks like, what spray foam costs and how it works. Every article lists its sources.

Visit Education
Foamy, the FoamGuard mascot, in a graduation cap reading a book, thinking it over

The first inch does most of the work.

Independent hot-box testing of closed-cell foam at increasing thickness. Heat loss reduction versus the bare assembly.

Gold bars are where we quote most walls and roof decks. Source: ASTM C-236 guarded hot-box testing by Architectural Testing Inc., York, PA. See the full test data and what it means for your building.

What we insulate

Same foam, same certified installers, same standard, whether it is a rim joist or a 5,000-square-foot roof deck.

  1. Pole barns & metal buildings

    Stops sweating roofs and drafty walls in one application. Our most common job.

  2. Existing homes

    Rim joists, walls, cathedral ceilings and additions. Comfort you can feel the first night.

  3. Commercial & industrial

    Warehouses, shops, ag buildings and manufacturing. Scheduled around your operation.

  4. Attics & roof decks

    Seal the roof deck and bring the attic inside the envelope. Ends ice dams at the source.

  5. Crawl spaces & basements

    Warm floors, dry air, a sealed foundation.

  6. New construction

    Walls, rim joists and unvented roof decks sealed at rough-in, before the drywall goes up.

Case studies & building science

Real projects with the numbers on them, and the test data behind how we spec a job.

90%less heat loss at 3 inches
Building science
How thick should closed-cell spray foam be? The ASTM C-236 data
Read the thickness data
65×more radon resistant than 6 mil poly
Building science
Closed-cell spray foam for radon abatement: 65× more resistant than 6 mil poly
Read the radon study

Have a commercial project?

Let's talk about your building. We quote from drawings or a walkthrough, and we work around your hours. Building mid-rise multifamily, mixed-use or office? See the Huntsman D-Max Wall, continuous insulation sprayed from inside, the engineering notes and three LEED-certified buildings built with it.

  • Multifamily & mid-rise
  • Warehouses
  • Metal buildings
  • Manufacturing
  • Agricultural
  • New construction
  • Cold storage
Send us the plans.

Square footage, substrate and target R-value are enough to start. We will come back with thickness, board feet and a fixed price.

Email the project Call (814) 208-3478

Straight answers

How much does spray foam insulation cost?

Closed-cell foam is priced per board foot (one square foot at one inch thick). Most FoamGuard projects land between $1.50 and $2.25 per board foot depending on thickness, access and total size. For that you get insulation, an air barrier and a vapor retarder in one application, installed once for the life of the building. Every quote is a fixed price with the thickness and square footage written on the data sheet. Use the estimator above for a range on your building, or the free insulation cost calculator to compare every insulation type.

How thick should closed-cell spray foam be?

Closed-cell becomes an air barrier at about one inch and a Class II vapor retarder (about 1 perm) at roughly an inch and a half. We size every lift to the assembly: typically two to three inches on walls and roof decks in Western PA, more where code or the building calls for it. The chart further up the page (“The first inch does most of the work”) shows why.

Is spray foam worth it?

Yes. Closed-cell spray foam is in a class of its own: R-7.4 per inch (about twice fiberglass or cellulose), and in the same pass it air-seals, blocks vapor and stiffens the structure. It doesn’t sag, settle or soak up water, so it keeps working for the life of the building. Your building only gets insulated once. This is the insulation that does all of it.

Can spray foam stop condensation on a metal roof?

Yes. A metal roof sweats when warm, humid inside air touches cold metal. Closed-cell foam bonded to the panel keeps that air off the metal and adds a vapor retarder in the same pass. It is the standard fix for dripping pole barns and shops.

Is spray foam really used on rockets?

Yes. NASA’s Space Launch System core stage is covered with sprayed, closed-cell foam that keeps liquid hydrogen at −423°F, and Japan’s H3, China’s Long March 5 and Europe’s Ariane rockets insulate their tanks with sprayed foam too. Your building gets a close cousin of that material, made and tested for buildings. How rockets use spray foam.

Does spray foam make a building airtight?

Yes, wherever it is applied: it seals the seams, gaps and penetrations in the same pass that insulates them. A tight building then gets controlled fresh air, whether that is a bath fan, an ERV or your existing HVAC, and we plan it with you.

How long does spray foam last?

For the life of the building. Cured closed-cell foam is inert, bonded in place, and does not settle or sag. The foam we install carries a manufacturer limited lifetime warranty, and our workmanship carries A Craftsman’s Promise, our five-year craftsmanship warranty, on top.

Can spray foam be installed in winter?

Yes. We heat the material and the hose, the foam we spray is rated for substrates down to 15°F, and we check substrate temperature and moisture before every lift. Wet or frosted surfaces get postponed, because foam only bonds to what it can stick to.

What is the difference between open-cell and closed-cell foam?

Closed-cell is dense, R-7.4 per inch, blocks vapor and water, and stiffens the structure. Open-cell is light, about R-3.6 per inch, absorbs moisture and needs a separate vapor retarder in our climate. We install both and will tell you which one your assembly needs.

Is spray foam safe?

Once cured, the foam is stable and inert. During and shortly after application, the space is kept clear of occupants and pets for the manufacturer's re-occupancy period. Our installers hold the ACC SPF-Safety certification, and the closed-cell product we spray is GREENGUARD Gold certified for indoor air quality.

How does FoamGuard warranty its work?

Two ways. A Craftsman’s Promise, FoamGuard’s written craftsmanship warranty, covers the installation itself for five years against defects in workmanship. The foam’s manufacturer covers the material under its own written product warranty; Huntsman’s closed-cell warranty, for example, is a limited lifetime warranty registered within 90 days of application. Both are in writing on every project agreement, and you can check yours any time at foam-guard.com/warranty with your warranty ID and ZIP code.

More straight answers: what to expect before, during and after a job →

Your building only gets insulated once.

Do it right, with the numbers on paper, and save yourself doing it twice. Sixty seconds in the estimator gets you a range; a walkthrough gets you a fixed price.

(814) 208-3478Call or text. Mon–Sat, 7am–7pm.
FoamGuard
Erie, Pennsylvania
spray@foam-guard.com
Two ways to start

Run your building through the estimator for a price range now, or skip it and have us come measure.

Open the estimator Book a free walkthrough
Call Get my price